Most riders spend weeks picking a suit and about four seconds deciding what goes under it. Then they turn up to their first session in a cotton tee and gym shorts, spend ten minutes fighting the zip, and wonder why the knees feel wrong in the tuck.
We cut and stitch leathers for a living. Plenty of fit problems have nothing to do with the suit itself. They come from what’s underneath it. So here’s the plain version of what we’d tell you across the workbench.
The short answer
Wear a thin, tight, synthetic undersuit. One piece if you ride track, two piece if you mix road and track. Nothing cotton, nothing baggy, nothing with thick seams. That covers most riders.
The rest of this post is about why, and about the few cases where the answer changes.
Why the layer under your suit matters
It decides how the suit goes on and comes off
Leather has a lining, and bare, sweaty skin grabs it. A loose shirt rides up your arms and bunches at the small of your back. A slick, stretchy layer lets the suit glide on instead. Bison Track describe exactly this in their guide to wearing an undersuit, and anyone who’s dressed in a hot pit lane between sessions knows it’s true.
It handles sweat
You’ll sweat in leathers. In July you’ll sweat a lot, and in November you’ll still sweat more than you think. Cotton soaks that up and holds it on your skin, so you’re clammy on the bike and cold the moment you stop. Motorcycle Gear Lab is blunt about it: skip cotton. We agree. Polyester, polyamide or lycra blends move moisture away. Merino is fine too if you prefer a natural fibre.
It changes your fit
This is the part the gear shops tend to skip, and it’s the one we care about most.
A race suit is cut close on purpose. It’s shaped for the tuck, so the armour sits on your elbows, knees and shoulders when you’re folded over the tank, not when you’re standing in the garage. Every millimetre you add underneath pushes the suit off its mark. A thick hoodie can lift the shoulder armour. Bunched joggers can drag the knee protector up toward your thigh. You won’t feel much standing. You’ll feel it on the brakes into turn one.
Measuring: bare skin or undersuit?
Either works for a made-to-order suit. You can measure over light clothes or over the thin layer you’ll ride in. Just keep it consistent: use the same layer for every measurement, and never measure over a winter jumper or jeans.
We build to the numbers you send, so the main thing is to be honest about what goes underneath. If you plan to ride in a thicker thermal, tell us in your order notes. Our size guide and our measuring walkthrough post walk through each measurement, so use the same layer for all of them.
We don’t keep stock suits. We cut yours once you order it, in any size, with production of 12 to 16 business days (16 to 20 for a custom design) plus 6 to 8 days delivery. That’s plenty of time to buy a decent undersuit and get used to it.
One piece or two piece underneath?
On track, the one-piece undersuit wins. There’s no gap at the waist to open up when you’re stretched forward, and nothing to bunch where the jacket and trousers of a two-piece suit zip together.
Two-piece sets make sense if you ride road in a jacket and jeans as well, or if you wear a two-piece leather suit. Pick a top with a long tail so it stays tucked in when you’re crouched.
A few small features help more than you’d expect:
- Thumb loops and stirrups, so sleeves and legs don’t creep up as you climb in
- Flat seams, because a raised seam under a hip protector turns into a hot spot after twenty minutes
- A fly or a front zip, because you’ll need the toilet at some point and peeling off a whole suit for that gets old fast
What about cold track days?
Early spring in the UK or a winter morning at an Australian circuit can be properly cold. The temptation is to pile on layers. Don’t, or at least not many.
A suit cut for a thin undersuit feels a bit tighter over a thick winter layer, and a fleece underneath will change how it fits. If you ride a lot in the cold, go for a slightly thicker thermal base layer that’s still close-fitting, and mention it when you order. If you ride mostly summer, keep the thin one and put a warm jacket on between sessions instead. The pit garage is where you warm up, not the bike.
Riding with an airbag vest
Our suits have no built-in airbag. Ask, though, and we’ll cut the suit airbag-ready, leaving space for the standalone vest you ride in. Mention it at checkout or in your order notes, and tell us which vest you’ll wear so we can allow room for it. The order then becomes undersuit, vest, leathers. The vest makers’ own instructions on how it’s worn always come first.
What to leave off
A few things we’d keep out of your suit entirely:
- Jeans or anything with rivets, belts or thick seams
- Jewellery, chains and watches
- Your phone in a chest pocket of the undersuit, where it can sit between you and the leather
Socks matter too. A long, thin sock that goes above the boot cuff is better than a thick hiking sock, which can make your race boots feel tight and numb your feet.
Look after it like kit, not laundry
Wash the undersuit after every riding day. It gets rank quickly, and a sweaty layer left in a suit bag isn’t kind to leather lining either. Bison Track suggest owning one per riding day between washes, which is sensible if you do back-to-back track days. Hang it to dry. Most of these fabrics don’t love a hot dryer.
Getting your suit right from the start
What you wear under your leathers and how the leathers fit are really one decision. Get the layer sorted first, measure in it, and the suit we build will sit where it should.
Our motorcycle leather race suits are made to order in any size and any custom design, with CE certified armour (Level 1 as standard, Level 2 as an upgrade when you order) and Kevlar panels. Shipping is free. Duties depend on your country; see our shipping policy. Standard sizes get a 14-day exchange.
Pair it with race gloves and boots, then get your numbers over to us and the cutting starts.
FAQ
Can I wear nothing under my race leathers?
You can, and some riders do. But bare skin sticks to the lining, the suit gets sweaty and smelly faster, and getting in and out is a fight. A thin undersuit fixes all three.
Is a compression shirt from the gym good enough?
For a first track day, a close-fitting synthetic gym top and leggings will do. Avoid cotton blends and anything loose. A proper riding undersuit is better, mainly for the loops, flat seams and longer cut.
Should I measure for a custom suit over my undersuit?
You can measure either way, over light clothes or over your thin undersuit. Use the same layer for every measurement, and tell us if you’ll ride in something thicker.
Can I wear a thermal layer in winter?
A thin, close-fitting thermal is fine. Bulky fleece isn’t, because it shifts the armour away from your joints. If you ride mostly in the cold, mention it when you order.
Do I need a different layer for an airbag vest?
Not a different one. Wear your normal undersuit, the vest over it, then the suit. Just request the airbag-ready cut on your order.
1 thought on “What to Wear Under Race Leathers: A Suit Maker’s Honest Answer”